Blow Moulding Machine Setter - Cape Town SSubs

Current Job Title Blow Moulding Machine Setter
(Single and Twostage Injection Stretch Blow Moulding ) references to Nissei/ASB/Sidel machines will indicate this

ONLY APPLY IF YOU CURRENTLY LIVE IN CAPE TOWN AND CAN EASILY TRAVEL TO THE CAPE TOWN SOUTHERN SUBURBS APPLICATIONS OUTSIDE OF CAPE TOWN WILL NOT BE CONSIDERED

Purpose Statement

Ensure production equipment is in good operating conditions and well maintained. Ensure correct setting of machine. Do fault analysis in case of malfunction or rejects.

Main Outputs and Responsibilities for this Position

Technical

• Identify report and rectify all technical areas of concern on assigned production equipment (machines moulds etc.)

Have an indepth understanding of

• Product and its quality criteria
• Process (material feeding and drying injection moulding reheat stretch blow moulding and injection blow moulding)
• General knowledge of all equipment detailed for assigned equipment
• Mould installation
• Technical principles and drawings (e.g. assemblies and spare part finding pneumatic hydraulic electric)

Fault analysis and problem solving

• Independently do fault analysis and problem solving in case of (teamwork as needed)
• Product quality issues
• mould issues
• machine malfunction (mechanic / hydraulic / pneumatic / electric)
• Recognize and report problems to Maintenance Manager & Production Manager on other than the assigned equipment

Maintenance

• Independently develop maintenance plans and check lists (teamwork as needed)
• Ensure maintenance is done at required intervals according to the plans
• By yourself
• By service suppliers as agreed by Maintenance Manager & Production Manager
• Document maintenance according to the plans

Spares

• Identify spares needed for assigned equipment
• In general
• As a preventative measure identified during maintenance checks

Machine Setting

• Optimization of the production process setting the machine for optimal performance and cycle time
• Ensure that the process integrity is optimal for each run if not amend and record new process setting
• Document settings as per standard practice at the facility

Management

• Liaise with Maintenance Manager & Production Manager (in charge) to ensure machine availability vs. major maintenance intervals
• Have an overview what needs to be done and report to Maintenance Manager & Production Manager
• Give completion dates and fulfill tasks required by Maintenance Manager & Production Manager
• Ensure sound relationships and communication with internal workrelated staff (QC Production etc.) and external (Bowler Plastics Toolroom Technical department suppliers etc.)

Strive for improvement research and make suggestions

Administration (job)

• Log jobs performed
• Analyze Defect Register together with Maintenance Manager & Production Manager to improve production result
• Contact external suppliers as agreed with Maintenance Manager & Production Manager to assist in solving problems (quotes on service spare parts etc.)

Spares

• have an overview of existing stock for equipment
• Spare part analysis ( keep stock vs. source at breakdown)
• Likelihood of wear/breakage vs. cost vs. delivery time
• report parts needed to Maintenance Manager & Production Manager and assist in decision to have on stock or source at breakdown
• assist Maintenance Manager & Production Manager in ordering process (e.g. prepare documents follow up on orders)
• Plan for the year ahead assist Maintenance Manager & Production Manager with work on budget for maintenance

Health & Safety

• Ensure and enforce that aspects in area of responsibility conform to Health and safety requirements.
• Maintain housekeeping standards in area of responsibility (e.g. ensure cleanliness assigned machines and areas)
• Work safely and report on safety hazards or issues
• Report any accidents incidents and near misses

• Apply the companys quality principles and standards
• Maintain Good Manufacturing Practices (GMP)
• Food Safety System Certification (FSSC)

Food safety standards are site specific and at these sites employees should:

• Apply the sites food safety principles and standards
• Report any food safety hazards or issues to your Supervisor/Manager
• Comply to and maintain all GMPs (Good Manufacturing Practices) in relation to the Companys FSMS (Food Safety Management System)

SelfDevelopment Growth and Training

• Realistic assessment of own strengths and development areas and undertake actions to address weaknesses if any that hinders the fulfilment of your objectives
• Keep abreast of innovation and technical improvements for further selfdevelopment and the development of the company
• Keep contact to your key suppliers and discuss with them
• Read operator manuals of machines
• Read literature that has to do with your position (e.g. on the internet Google etc.)
• Teamwork and cooperation
• SelfManagement
• Leadership and interpersonal relationship
• Product and service quality

General

• Perform additional tasks as required from time to time
• Ensure team knows what to do and where to find information if you are not available
• Inform yourself about and apply the companys principles and standards
• Set an example be a role model for your team and others in the way you work and behave

The employee accepts that he / she may be required to carry out any other tasks as required by management based on operational requirements

JOB EVALUATION CRITERIA

Secondary Education Grade 12

Tertiary Education (including Diplomas Certificates and Degrees) Minimum N2 in Tool Jig & Die trade theory and trade tested (red seal) preferable

Experience 5 years relevant setting experience

Competencies

Knowledge

• Sound understanding of drawings
• Fundamentals of fault finding and equipment testing
• Sound knowledge on H&S and safe working procedures

Skills

• Installation of parts & related equipment
• Fault finding and problem solving
• Good communication skills
• Ability to act decisively and urgently
• High level of emotional intelligence and interpersonal skills

Other Special Requirements

• Passionate to progress a career into Packaging for the future with an appreciation of the environment concerns and impacts.

Decision Making

• Able to make good business aligned judgement decisions at an operational level whilst maintaining maintenance standards practices & procedures in line with defined and communicated authority and as per instructions

Accountability

• Responsible for all activities linked to position as defined
• Ensure escalation to the appropriate level of authority

Communication

• Ensure transparent responsive and open communication between colleagues

Remote Work :

No