Toolmaker
Universal City, TX - USA
Job Summary
Click on Learn more about this agency button below to view Eligibilities being considered and other IMPORTANT information.
The primary purpose of this position Toolmaker WGis to design repair test heat treat and calibrate high-precision tools dies jigs fixtures master gauges specialized holding devices and prototypes required for the manufacture modification overhaul and repair of military aircraft weapon systems munitions and Aerospace Ground Equipment (AGE).
- Fabricate overhaul calibrate and repair tools jigs fixtures and gages used in machining and aircraft structural repair work; develop fabricate and repair various types of tooling used in aircraft structural repair operations; and fabricate and repair molds used in molding.
- Set up and operate common machine tools and attachments to perform special and precise machining operations by devising and constructing fixtures and holding devices.
- Perform work of an aircraft structural machinist to include but not limited to.
- Use a variety of precision instruments and equipment.
- U.S. Citizenship Required
- Males must be registered for Selective Service see
- Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
- If authorized PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS you may be subject to completing/signing a CONUS agreement. More information on PCS requirements may be found at: incentives may be authorized
- The position is subject to provisions of the DoD Priority Placement Program
- This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
- Employee may be required to work other than normal duty hours to include evenings weekends and/or holidays
- Shift work and emergency overtime may be required
- Employee must maintain current certifications
- Disclosure of Political Appointments
- Depending on the type of position (competitive/excepted) you are selected for you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period your employment will be terminated unless you receive certification in writing that your continued employment advances the public interest.
- Relocation costs or other incentives may be available and considered by the organization.
- This position may require travel.
- Direct Deposit: All federal employees are required to have direct deposit.
- This is a Mission-Essential position performing a Mission-Critical-Function which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions.
- This position has been designated as Key/Emergency Essential (E-E).
- In the event of a crisis selectee must perform the Key/E-E duties until relieved. This position cannot be vacated during a national emergency or mobilization. Requires the incumbent be removed from military recall status.
- A pre-employment physical examination will be required.
In order to qualify you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-3400 Machine Tool Work Family. Although a specific length of time and experience is not required for most blue-collar positions you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience not necessarily the length of time.
The screen out element for this position is: Ability To Do The Work Of The Position Without More Than Normal Supervision
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge skills abilities and/or competencies in the following areas:
- Operation of Machine Tools
- Technical Practices (theoretical precise artistic)
- Ability To Use Shop Drawings
- Measurement and Layout
- Ability To Use Hand Tools for Machine Shop
- Knowledge of Metals
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience including volunteer work done through National Service Programs (i.e. Peace Corps AmeriCorps) and other organizations (e.g. professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience including volunteer experience.
The work requires substantial physical activity including prolonged periods of standing walking bending stooping crouching and reaching. Frequently lifts maneuvers and positions workpieces steel blocks fixtures chucks and machine accessories weighing up to 50 pounds independently and uses overhead bridge cranes hoists or assistance from other shop personnel for heavier loads. Requires continuous mental and visual concentration to observe fine cutting action set sensitive dial indicators align optical crosshairs and manipulate delicate precision measuring instruments.
WORKING CONDITIONS
Work is typically performed inside an industrial machine shop environment with well-controlled ambient lighting and ventilation. The incumbent is exposed to continuous shop noise flying metal chips high-speed rotating cutters abrasive dust cutting oils lubricants solvents and intense heat during heat-treating operations. Hazards include cuts abrasions burns punctures and machine pinch points. Strict adherence to safety regulations and Air Force Occupational Safety and Health (AFOSH) standards is mandatory. Required to wear personal protective equipment (PPE) including safety glasses with side shields steel-toe safety footwear hearing protection face shields and heat-resistant gloves as appropriate.
KEY POSITION
The duties of this position meet all requirements as a category 4 designation and shall not be vacated during a national emergency or mobilization without seriously impairing the capability of the parent Federal Agency or office to function effectively. This position must be removed from the Ready Reserve and CAN NOT become a member of the Ready Reserve. (IAW: DoDD 1200.7 Screening the Ready Reserve).
MISSION ESSENTIAL
This is a Mission-Essential position performing a Mission-Critical-Function which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions.
This job does not have an education qualification requirement.
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice your most recent performance rating and your most recent SF-50 noting position grade level and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants if determined best qualified must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4 Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4 Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants if determined well qualified and selected will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4 select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
Incentives: Recruitment and/or retention incentives may or may not be used.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016 who is a veteran with a service-connected disability rating of 30% or more. For more information click here.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
Candidates should be committed to improving the efficiency of the Federal government passionate about the ideals of our American republic and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.