General Engineer
Job Summary
The primary purpose of this position is to serve as a senior Joint Facility Programmer planner and theater infrastructure architect at the Combatant Command (COCOM) level within the Headquarters U.S. Central Command (USCENTCOM).
Click on Learn more about this agency button below to view Eligibilities being considered and other IMPORTANT information.
- Analyzes directs and develops plans and programs for new construction repair and improvements of real property facilities including infrastructure using extensive professional knowledge of several engineering disciplines principles and standards.
- Develops program resource allocation planning programming and budgeting for assigned programs within the MPPL and/or other construction programs.
- Analyzes program documentation supporting the POM FYDP and budget submissions for assigned assets to determine if projections are accurate and overall asset performance is being achieved as projected.
- Represents the organization with a variety of outside agencies CCMD Theater Posture Location and Contingency Location activities and/or Service Component installation organizations. Serves as the authoritative USCENTCOM engineering programmer and principal liaison to the Joint Staff (J4/J8) OSD (A&S) SAF/IE Service Headquarters (HQDA HQ USAF OPNAV HQMC) and Construction Agents (USACE AFCEC).
- U.S. Citizenship Required
- Males must be registered for Selective Service see
- Disclosure of Political Appointments
- This position is subject to provisions of the DoD Priority Placement Program
- Work may require travel away from the normal duty station on military or commercial aircraft.
- May be required to possess a valid operators license in order to drive a motor vehicle to and from work sites.
- Position is designated special-sensitive and incumbent must be able to obtain and retain a TOP SECRET (TS) security clearance with access to Sensitive Compartmented Information (SCI) based on a Tier 5 investigation.
- A non-disclosure agreement must be signed.
- Work frequently takes place away from the normal duty station and requires in-depth USCENTCOM AOR expertise which is critical to the successful completion of the work.
- Incumbent is subject to recall during off-shift hours seven days a week twenty-four hours a day and may be required to perform periodic TDY (CONUS and OCONUS) in commercial and military aircraft to include during crisis and/or wartime.
- This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program.
- Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force national security and public safety.
- At a minimum qualification requirements stipulated by the Office of Personnel Management for the 0801 occupational series must be met. A professional engineering degree at the bachelors level from an ABET accredited institution is highly desired.
- This position is designated as a key position. The duties of this position meets all requirements as a category 4 designation and shall not be vacated during a national emergency or mobilization (CONT)
- without seriously impairing the capability of the parent Federal Agency or office to function effectively. This position must be removed from the Ready Reserve and CAN NOT become a member of the Ready Reserve.
- (IAW: DoDD 1200.7 Screening the Ready Reserve)
- This is a Centrally Managed Position in the Civil Engineer Career Field. PCS will be paid in accordance with JTR Vol. 2 and applicable Air Force Regulations.
- Depending on the type of position (competitive/excepted) you are selected for you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period your employment will be terminated unless you receive certification in writing that your continued employment advances the public interest.
In order to qualify you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions Professional and Scientific Positions
BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable the program must: (1) lead to a bachelors degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics such as optics heat transfer soil mechanics or electronics.
OR
B. Combination of education and experience -- college-level education training and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering and (2) a good understanding both theoretical and practical of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI) Engineer in Training (EIT)1 or licensure as a Professional Engineer (PE) by any State the District of Columbia Guam or Puerto Rico. Absent other means of qualifying under this standard those applicants who achieved such registration by means other than written test (e.g. State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example an applicant who attains registration through a State Boards eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States the District of Columbia Guam and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical mathematical and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field e.g. engineering technology physics chemistry architecture computer science mathematics hydrology or geology may be accepted in lieu of a bachelors degree in engineering provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence or several years of prior professional engineering-type experience e.g. in interdisciplinary positions.
In addition to meeting the basic requirement above to qualify for this position you must also meet the qualification requirements listed below:
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-12 or equivalent in other pay systems. Examples of specialized experience includes mastery of advanced multidisciplinary engineering concepts and professional facility engineering/architecture concepts principles practices standards methods techniques materials and equipment sufficient to effectively manage program planning and programming to support the organizations mission. Extensive knowledge of advanced engineering concepts principles practices methods and techniques to integrate and evaluate facility requirements and engineering alternatives at the planning and programming stages. Skill as a technical expert applying new theories and standards to problems not susceptible to treatment by accepted and established practices and procedures. Ability to apply new applications or developments to resolve unique or novel problems conditions or issues; or to significantly alter standard practices equipment devices processes and known techniques. Ability to develop recommend and implement best business practices. Ability to communicate effectively both orally and in writing providing expert advice to senior officials and colleagues responsible for broad program operations.
FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-12 level is required to meet the time-in-grade requirements for the GS-13 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.
KNOWLEDGE SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge skills abilities and/or competencies in the following areas:
1. Mastery of advanced multidisciplinary engineering concepts principles practices standards methods and techniques of professional facility engineering/architecture to effectively perform project planning programming development execution and advisory services.
2. Extensive knowledge of advanced engineering concepts principles practices methods and techniques to provide expert judgment concerning programs/operations; resolve unique or novel problems conditions or issues; and significantly alter standard practices processes and known techniques.
3. Knowledge of a variety of qualitative and quantitative methods for the assessment and improvement of program effectiveness including long term comprehensive planning.
4. Knowledge of facility planning/programming principles and work classification to apply new theories and/or applications to issues and provide expert technical advice and direction to senior officials.
5. Knowledge of planning programming and budgeting cycles; financial systems; restrictions on the expenditures of funds; and applicable public laws.
6. Skill in devising and applying new approaches and standards to problems not susceptible to treatment by accepted and established practices and procedures.
7. Ability to communicate effectively both orally and in writing with senior officials from a broad array of activities including federal and local government and industry.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience including volunteer work done through National Service Programs (i.e. Peace Corps AmeriCorps) and other organizations (e.g. professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience including volunteer experience.
IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however if position has a positive degree requirement qualifying based on education alone or in combination with experience transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.
FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice your most recent performance rating and your most recent SF-50 noting position grade level and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants if determined best qualified must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4 Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4 Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants if determined well qualified and selected will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4 select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016 who is a veteran with a service-connected disability rating of 30% or more. For more information click here.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
Candidates should be committed to improving the efficiency of the Federal government passionate about the ideals of our American republic and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Experience:
IC