Rocker Framer

Responsibilities include:

• Cut drywall to the proper size for installation.
• Carry and hang drywall using a screw gun to attach to the wall.
• Cut metal or wood studs to size.
• Construct and install framed partitions and various types of bulkheads.
• Layout from plans and blueprints or familiar with construction standards.
• Put on corner and ceiling bead.
• This may include cleanup sping moving material tools or equipment.
• Erect and dismantle scaffolds.
• Calculate unit costs based on the quantity of material installed hours worked and labor dollars.
• Attend and participate in all required company training programs.
• Conform to all company policies and procedures.
• Other duties as assigned.

Requirements of the position include:

• Ability to lift/carry up to 120 lbs.
• Must be able to climb a ladder/scaffold.
• Requires climbing stairs up to 40 steps/hr in (8 hrs).
• Must be able to reach from floor to overhead.
• Requires repetitive assumption of posture to access a point (80 inches) from the floor up to (400/day).
• Must be able to stand.
• Requires (Near/Far/Depth/Color) vision.
• Must be able to walk.
• Requires walking up to (3000.0 ft.) in (1 day).
• Must be able to lift/carry 50 lb toolbag up and down 3 stairs per 5 min. period.
• Must be able to safely operate screw gun rotozip hammer gyp knife and tape measure between 15x50x per hour.