Electro Technician

Roles and responsibilities

The Electro Technical Officer (E.T.O.) provides electronic, electrical and communications expertise as an integrated member of the Engineering Department and on occasion, performs in the role of duty engineer.

ELECTRICAL, ELECTRONICS and MARINE ENGINEERING
• On first joining a ship, the E.T.O. must appraise the Chief Engineer Officer of his engineering qualifications and experience in maintaining and repairing electronic/electrical control equipment and associated electrical apparatus.
• The Chief Engineer Officer must in turn advise the E.T.O. of the extent of the electrical equipment installed on the ship and any items where his expertise is likely to be regularly required.
• Thereafter, the E.T.O. shall familiarize him with the electronic installation, paying special attention to equipment with which he is unfamiliar, or which the Chief Engineer Officer has advised may need his assistance.
• The E.T.O. shall work as directed by the Chief Engineer Officer, to undertake the testing, servicing, and maintenance of all electronic/electrical equipment.
• The E.T.O. is responsible for the maintenance of all electronic navigation aids and communication equipment.
• The E.T.O. shall carry out and record routine servicing and maintenance of all GMDSS and communication facilities and shall repair defects to the best of his abilities. The E.T.O. shall discuss all aspects of work with the Chief or Second Engineer Officer. When he is unable to repair defects fully and permanently, the E.T.O. shall advise the Chief Engineer Officer, and with his approval obtain advice and/or assistance from NSQL Office.
• The E.T.O. shall supervise and record all electrical service work carried out from shore, to ensure that the equipment is left in a fully operational condition. He shall check service engineer's timesheets and service reports for accuracy and ensure full details of parts supplied are recorded. Such details shall be advised to the Chief Engineer Officer, who shall ensure that copies of the reports, etc. are forwarded to NSQL Office.
• The E.T.O. shall maintain batteries and lifeboat radios as required by statute and keep related records in the Official Log.
• During refits, the E.T.O. shall supervise the work to be done on equipment within his care in order to ensure that the final result is satisfactory. The E.T.O. shall fully report to the Engineer Superintendent or his nominee via the Chief Engineer Officer. The E.T.O. shall also be responsible for the security of all equipment in his charge.
• The ETO must carry out any lawful command and delegated duty as issued by the Chief Engineer. and /or Master.
AS DUTY ENGINEER WHEN REQUIRED
In order to fulfil the role of duty engineer, the E.T.O. shall become familiar with the main propulsion and auxiliary plant and with its safe operation.

Carry out routine watchkeeping 24hrs in every 72hrs on ships operating an unmanned machinery space or on watch keeping ships keep an engine room watch.

Accountabilities

• The safety of all personnel working directly for him.
• Maintenance as directed.
• If appointed for fourth engineer duties, carry out associated maintenance tasks to this role.
• If appointed for third engineer duties, carry out associated maintenance tasks to this role.

Desired candidate profile

Competencies

Budget Control

Bunkering operations

Charterers instructions, terminal and state requirements, port documentation

Cleaning and inspection of WHU and uptake fires

Communications with other nationalities

Crankshaft deflections, Alternator air gaps

Disciplinary procedures & process

Diversity Awareness

Emergency procedures

Experience with cargo transfer operations (STS, Co-mingling, COW, Inert Gas, LNG discharge, emergency operations)

Experience with multinational crews

Experience with Products Crude and LNG Cargo planning arrangements

Flashing from cold, purge cycles, testing of Boiler water and associated hazards with incorrect impurity levels.

Function of AVR and Brushless excitation

Handling incompetent/difficult staff

Hazards associated with cargoes.

HV experience and safety precautions

IG systems, Deck water seal, Fixed O2 analyzers and calibration

IMO conventions and requirements.

Importance of testing Quick closing valves/ Fire flaps/ Emergency bilge suction / CO2 / FFA equipment.

Intrinsically Safe/Explosion proof fittings

IT experience

LNG pumping systems and HV equipment

Newbuilds

Onboard Accounting procedures

Operation of cargo handling equipment and construction of tanks.

Ordering & Purchase of victuals and stores,

Personal safety, Ship safety & protection of the environment.

Preparations for all surveys.

PSC, SIRE, ISM, ISPS and other industry inspections.

PTW systems, ISM requirements, Risk assessment

Refit Experience

Reverse power trips

Reversing, Cylinder lubrication, Performance measuring.

Routine Maintenance

Routine maintenance, Emergency operation. Cylinder Liner oil retention, piston rings and quills.

Safety equipment

Steam driven cargo pumps, Frame systems.

Steering Gear, Evaporators, Air compressors, Hotel Services and Fridge systems. Purifiers and Clarifiers

Team building - How to train and guide subordinates

Testing of boiler trips etc.

Written and spoken English to high standard.